Cleaning The Adf - Fujitsu FI-4530C Operator's Manual
Image scanner
Hide thumbs
Also See for FI-4530C:
- Operator's manual (143 pages) ,
- Getting started (27 pages) ,
- Consumable replacement and cleaning instructions (14 pages)
Table of Contents
Advertisement
3.2
Cleaning the ADF
As a guideline, clean the ADF after every 5,000 scans. Note that this guideline varies according to
the type of documents you are scanning. For example, it may be necessary to clean the ADF more
frequently if documents are scanned when the toner is not sufficiently fixed on the printout.
1. Open the ADF cover while pushing down the ADF button.
54
AUTION
The front portion
ADF button
AUTION
The glass surface inside the ADF becomes hot during
the operation of the scanner. Before you start to clean
the inner parts of the scanner, disconnect the AC
adapter from the power outlet, and wait at least 15
minutes to let the glass cool down.
Be careful, the ADF cover may close and pinch your
fingers.
Advertisement
Table of Contents
