Fujitsu FI-4530C Operator's Manual page 62

• Feed rollers
1) Open the ADF while pushing down the ADF button. If you open the ADF cover
when the indication of the Function No. display is "P" or "0", the Feed rollers do
not rotate even you perform the operation of step 2) below. So open the ADF cover
when the indication is not "P" or "0".
2) Simultaneously hold down the "Send to" and "Scan" buttons on the operator panel.
The Feed rollers rotate a little. For details on locations of the "Send to" and "Scan"
buttons, refer to "1.3 Operator panel" in fi-4530C Getting Started on the Setup CD-
ROM.
3) Hold a lint-free dry cloth moistened with the Cleaner F1 against the surfaces of the
rotating Feed rollers so that it lightly cleans their surfaces. Take particular care in
cleaning these rollers as black debris on them adversely affects pickup perfor-
mance. As a guideline, seven presses of the "Send to" and "Scan" buttons rotates
the Feed rollers one full turn.
• Plastic rollers
Clean the Plastic rollers lightly, not to roughen the roller surfaces. Take particular care in
cleaning these rollers as black debris on them adeversely affects the pickup performance.
Be careful no to damage the sponges beside the rollers.
AUTION
• Eject rollers
1) Open the ADF while pushing down the ADF button. If you open the ADF cover
when the indication of the Function No. display is "P" or "0", the Eject rollers do
not rotate even you perform the operation of step 2) below. So open the ADF cover
when the indication is not "P" or "0".
2) Simultaneously hold down the "Send to" and "Scan" buttons on the operator panel.
The Eject rollers start to rotate a little. For details on locations of the "Send to" and
"Scan" buttons, refer to "1.3 Operator panel" in fi-4530C Getting Started on the
Setup CD-ROM.
Hold lint-free dry cloth moistened with the Cleaner F1 against the surfaces of the rotating
Eject rollers so that it lightly cleans the surfaces of the rollers. Take particular care in clean-
ing these rollers as black debris on them adversely affects the pickup performance. As a
guideline, seven presses of the "Send to" and "Scan" buttons rotate the Eject rollers one full
turn.
In step 2, the Feed rollers turn at the same time while
rotating the Eject rollers.
When cleaning the Eject rollers, be careful not to touch
the Feed rollers.
fi-4530CImage Scanner Operator's Guide
3.2 Cleaning the ADF
57
3