Fujitsu FI-4530C Operator's Manual page 20

■ FUJITSU ISIS Scanner Driver
FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner fi
series by using application software that complies with The ISIS standard.
The following describes the procedure with examples of QuickScan for ordinary scanning by using
this driver software.
The procedure may vary depending on your application.
If you use an application other than QuickScan, please refer to its Guide or Help for further
information.
1. Procedure for Basic Scanning Operation
1. Startup the application.
From the [Start] menu, select [Programs]-[QuickScan] and click [QuickScan].
2. Select your scanner on the window below.
Select [Scan] - [Select Scannerc] on the menu bar.
3. Select the scanner to use, then click the [OK] button.
4. Select [Scan] - [New Batch] on the menu bar.
1.4 How to use the Scanner Driver
fi-4530CImage Scanner Operator's Guide
1
15