Options - Siemens WM14U840 Series Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Operating the appliance
en

Options

After you have set a programme, you
can use the options to further customise
the washing process to your laundry.
You can do the following to options:
Adjust them
Activate/deactivate them
Adjust them
Touch the option.
1.
The setting options are displayed.
Touch or swipe your finger along the
2.
bar until the required value is
displayed.
The changes are applied
Note:
immediately and do not need to be
confirmed.
Activating/deactivating
Touch the option.
1.
Touch the option to activate or
2.
deactivate it.
Remote start }
Activate remote start to allow the
appliance to be started via the
Home Connect app.
Touch it briefly to activate or deactivate
it.
30
Notes
The appliance must be connected to
your home network to activate
remote start.
Remote start can only be activated if
the appliance door and detergent
drawer are closed.
Remote start cannot be activated if
the childproof lock is active.
Deactivate the childproof lock
beforehand.
Remote start will be deactivated for
safety reasons in the following
circumstances:
If you open the door.
In the event of a power failure.
Once the programme has ended.
If you press I on the appliance.
If you press Remote start } again
on the appliance.
If you press " for standby mode.
i-Dos ¨
Adjust the dosage of the intelligent
dosing system. (i-Dos Auto Dosing)
Depending on how dirty your laundry is,
choose the most suitable liquid
detergent dosage before the
programme starts.
Depending on how soft you want your
laundry to be, choose the most suitable
softener dosage.
Touch the button for the reservoir
1.
you require.
You can pour either softener
Note:
or liquid detergent into the left-hand
i-Dos reservoir. ~ Page 35
Touch or swipe your finger along the
2.
bar until the required value is
displayed.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm14u840eu

Table of Contents