Table of Contents
Advertisement
Positioning and connecting
en
Transportation
e.g. when moving home
Preparatory work:
Turn off the water tap.
1.
Reduce the water pressure in the
2.
supply hose. ~ Page 56
Drain any residual water.
3.
~ Page 55
Disconnect the appliance from the
4.
mains.
Remove the hoses.
5.
Empty the dispensers. ~ Page 53
6.
Installing the transport locks:
Remove the covers and keep them
1.
in a safe place.
Use a screwdriver if
Note:
necessary.
Insert all four sleeves.
2.
20
a) Clip the hoses securely in the
holders.
b) Clip the mains cable securely in
the holders.
c) Insert and tighten the screws.
Before switching on the appliance
again:
Notes
The support struts must be
■
removed.
The transport braces must be
■
removed.
~ "Removing the transport locks"
on page 14
Pour approx. 1 litre of water into the
■
dispenser for manual dosing, select
the Rinse, Spin or Drain programme
and start. This will prevent detergent
from flowing straight into the drain
during the next wash.
Advertisement
Table of Contents
