Programme Settings/Options - Siemens WM16Y890ES Instruction Manual And Installation Instructions

Programme settings/options

Depending on the programme, you can use the programme
options to adjust the washing process even more efficiently to
your items of washing.
Programme settings/options:
Ø
Ø
Ø
Buttons
Temperature
Spin
Finish in
ecoPerfect
speedPerfect
Are active without acknowledgement.
Can be selected or deselected or changed depending on the
programme progress.
Settings i-Dos I
i ô
is switched off. All other programme settings/options must be
reset for reselection.
Notes
Before and during the programme the presettings
can be changed for as long as the arrows are
displayed. ~ Page 15
Maximum spin speed depends on the programme
and model.
Delays the Finished in time (end of programme).
Before the programme starts, the end of the
programme can be preselected in h steps up to
maximum 24h.
When the programme has started, the preselected
time is displayed e.g. for 8h and counts down until
the wash programme starts. Then the programme
duration is displayed, e.g. 2:30h.
When the programme has started, the preselected
time can be changed as follows:
1. Select inicio/pausa+carga
(Start/Pause+Reload).
2. Select terminado en/em (Finish in) button and
change Finish in time.
3. Select inicio/pausa+carga
(Start/Pause+Reload).
To activate/deactivate the Childlock. ~ Page 18
For saving energy. ~ Page 16
¦
For a shorter wash time. ~ Page 16
G
and i-Dos are retained after appliance
ô
Ü
Ü
29