Table of Contents
Advertisement
Cleaning and maintenance
en
The drain hose at the siphon
is blocked
Press the " button. Pull out the
1.
mains plug.
Loosen the hose clamp. Carefully
2.
remove the drain hose; residual
water may leak out.
Clean the drain hose and siphon
3.
connecting piece.
Re-attach the drain hose and secure
4.
the connection point using the hose
clamp.
Filter in the water supply is
blocked
Release water pressure in the supply
hose:
Turn off the water tap.
1.
Select any programme (except
2.
Rinse, Spin and Drain
programmes).
Select the I button. Allow the
3.
programme to run for approx. 40
seconds.
Press the button ".
4.
Pull out the mains plug.
5.
56
Clean the filters:
Disconnect the hose from the rear of
1.
the appliance.
Use pliers to remove the filter.
2.
Clean the filter with a small brush.
3.
Connect the hose and check for
4.
leaks.
Advertisement
Table of Contents
