I-Dos Detergent Draw And Its Housing53 - Siemens WM14U840 Series Instruction Manual And Installation Instructions

Table of Contents

Advertisement

i-Dos detergent draw and its
housing
1.
Emptying the dispensers:
The detergent drawer can be
removed completely to allow you to
clean to dispensers after you have
emptied them.
The dispensers have emptying
outlets with removable sealing plugs
at the front. To empty the
dispensers, first remove the drawer
handle as shown below:
a) Pull out the detergent drawer.
b) Pull the catch (A) on the back of
the drawer handle (in the centre
at the bottom) slightly towards
you. This unlocks the drawer
handle (B), which you can then
pull off by lifting it upwards.
Cleaning and maintenance
Only put the drawer handle
Note:
back on after you have finished
cleaning.
c) To empty the dispensers,
carefully pull off each of the
sealing plugs and empty the
contents into a suitable container.
d) Then push the sealing plugs
back in completely.
2.
Cleaning the dispensers/detergent
drawer:
a) Press the catch and remove the
drawer completely.
b) Carefully remove the drawer
cover.
en
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm14u840eu

Table of Contents