Siemens WM14UT93GB User Manual And Installation Instructions

Siemens WM14UT93GB User Manual And Installation Instructions

Hide thumbs Also See for WM14UT93GB:
Table of Contents

Advertisement

Washing machine
WM14UT93GB
en
User manual and installation instructions
Register your product on My Siemens and discover
exclusive services and offers.
siemens-home.bsh-group.com/welcome
The future moving in.
Siemens Home Appliances

Advertisement

Table of Contents
loading

Summary of Contents for Siemens WM14UT93GB

  • Page 1 Washing machine WM14UT93GB User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
  • Page 2: Table Of Contents

    For further information, please refer to the Digital User Guide. Table of contents 1 Safety ..........   4 7 Display ........   20 1.1 General information.... 4 8 Buttons ........   23 1.2 Intended use....... 4 1.3 Restriction on user group... 4 9 Programmes .......    24 1.4 Safe installation ...... 5 10 Accessories......
  • Page 3 14 Childproof lock......   32 14.1 Activating the childproof lock ......... 32 14.2 Deactivating the childproof lock ......... 32 15 Basic settings......   32 16 Cleaning and servicing ....    32 16.1 Cleaning the drum.... 32 16.2 Cleaning the detergent drawer........ 33 16.3 Cleaning the drain pump.. 33 17 Troubleshooting.......
  • Page 4: Safety

    en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
  • Page 5: Safe Installation

    Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
  • Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
  • Page 7: Safe Use

    Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
  • Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
  • Page 9: Safe Cleaning And Maintenance

    Safety en 1.6 Safe cleaning and maintenance Take note of the safety instructions when cleaning and performing maintenance work on the appliance. WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff.
  • Page 10: Preventing Material Damage

    en Preventing material damage Make sure that the length of the ▶ Preventing material damage 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be Follow these instructions to avoid ma- Preventing material damage able to operate properly.
  • Page 11: Environmental Protection And Saving Energy

    Environmental protection and saving energy en Remove all detergent residue, Reduce the washing temperature for ▶ spray residue or other residues im- lightly and normally soiled laundry. mediately if they come into contact a At lower temperatures, the appli- with the appliance. ance consumes less energy.
  • Page 12: Installation And Connection

    en Installation and connection Replace the accessories in ques- ▶ Installation and connection 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 28 Installation and connection Note: The appliance has been tested 4.1 Unpacking the appliance at the factory to check it is in working order.
  • Page 13 Installation and connection en 4.4 Removing the transit Installation loca- Requirements tion bolts Base Secure the appli- The appliance is secured for trans- ance with fixing portation using transit bolts on the brackets rear of the appliance. → Page 28. Note: Keep the transit bolt screws and the sleeves in a safe place for fu- ture transport → Page 45.
  • Page 14: Connecting The Appliance

    en Installation and connection Pull the power cable out of the Press down on the 4 cover caps. holder. 4.5 Connecting the appliance Remove the 4 sleeves. Connecting the water inlet hose Connect the water inlet hose. Put on the 4 cover caps. Connect the water inlet hose to a tap (26.4 mm = 3/4").
  • Page 15: Aligning The Appliance

    Installation and connection en Water outlet connection types 4.6 Aligning the appliance This information is intended to help In order to reduce noise and vibra- you to connect this appliance to the tion and to prevent the appliance water outlet. from moving, align the appliance cor- rectly.
  • Page 16: Connecting The Appliance To The Electricity Supply

    en Installation and connection Screw the lock nuts tightly against the housing using a WAF 17 wrench. In doing so, hold the foot tight and do not adjust its height. 4.7 Connecting the appliance to the electricity supply Insert the mains plug of the appli- ance's power cable in a socket nearby.
  • Page 17: Familiarising Yourself With Your Appliance

    Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
  • Page 18: Detergent Drawer

    en Familiarising yourself with your appliance 5.2 Detergent drawer Measuring aid for liquid deter- gent → "Using a measuring aid for liquid detergent", Page 30 Compartment II: ¡ Detergent for main wash ¡ Water softener ¡ Bleach ¡ Stain remover Compartment ¡ Fabric softener ¡...
  • Page 19: Before Using For The First Time

    Before using for the first time en Pour standard washing powder Before using for the first time 6 Before using for the into compartment II. first time Prepare the appliance for use. Before using for the first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory.
  • Page 20: Display

    en Display Display 7 Display The display shows the current settings, options or relevant information. Display Display Designation More information 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining "Ready in" time → "Buttons", Page 23 9,0 kg Recommended The maximum load capacity for the selec- load...
  • Page 21 Display en Display Designation More information – –– Rinse Hold Programme status End of pro- Programme status gramme Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 32 Less Ironing...
  • Page 22 en Display Display Designation More information ¡ No water pressure. ¡ The water pressure is too low. E:35 / -10 Error Error code, error display, signal. Example...
  • Page 23: Buttons

    Buttons en Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons You can see the selection options for each programme in the overview for . Button Selection More information Start/Reload ¡ Start Start, cancel or pause the pro- gramme.
  • Page 24: Programmes

    en Programmes Programmes 9 Programmes Programmes Note: The laundry's care labels provide you with additional information about programme selection. Care symbols on the care labels Programme Description Max. load (kg) Cottons Wash hard-wearing items made from cotton, linen or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate vario Speed.
  • Page 25 Programmes en Programme Description Max. load (kg) Easy Care Wash items made from synthetic or blended fab- rics. Programme setting: ¡ Max. 60 °C ¡ Max. 1200 rpm Mixed Fabrics Wash items made from cotton, linen, or synthetic or blended fabrics. Suitable for lightly soiled laundry.
  • Page 26 en Programmes Programme Description Max. load (kg) Shirts Wash non-iron shirts and blouses made from cot- ton, linen, or synthetic or blended fabrics. Tip: In order to avoid creasing in your laundry, you can activate Less Ironing. The laundry is only given a short spin and can be removed while still drip- ping wet.
  • Page 27: Laundry

    Programmes en Programme Description Max. load (kg) ¡ Max. 1200 rpm Dark Wash Wash dark-coloured and colour-intense items made from cotton or easy-care fabric, e.g. jeans. Turn laundry inside-out before washing. Use liquid detergent. Programme setting: ¡ Max. 40 °C ¡ Max. 1200 rpm Drum Clean Cleaning and caring for the drum.
  • Page 28: Preparing The Laundry

    QR code in the table of bag. contents or on www.siemens- home.bsh-group.com . – Tie together longer drawstrings, and tie cords with solid end- 11.1 Preparing the laundry pieces in hoods or trousers –...
  • Page 29: Detergents And Care

    ▶ Detergents and care products Notes programme. ¡ More detailed instructions for use can be found on www.siemens- 13.2 Setting a programme home.bsh-group.com or by scan- ning the QR code on the title page Turn the programme selector and of this user manual.
  • Page 30: Using A Measuring Aid For Liquid Detergent

    en Basic operation Slide the measuring aid forwards. 13.5 Using a measuring aid for liquid detergent If you order the measuring aid as an accessory, you must use the measur- ing aid. Pull out the detergent drawer. Press down on the insert and re- move the detergent drawer.
  • Page 31: Starting The Programme

    Basic operation en appears, it is not pos- Note: If 13.8 Starting the programme sible to add laundry. Note: If you want to change the time When goes out, it is possible to until the programme ends, set the add laundry. "Ready in" time first. Open the appliance door.
  • Page 32: Childproof Lock

    Basic settings meet your needs. Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.siemens- home.bsh-group.com . Cleaning and servicing 16 Cleaning and servi- cing Leave the appliance door and de-...
  • Page 33: Cleaning The Detergent Drawer

    Cleaning and servicing en Fit the insert and click it into place. 16.2 Cleaning the detergent drawer Pull out the detergent drawer. Press down on the insert and re- move the detergent drawer. Clean the opening for the deter- gent drawer. Pull out the insert upwards. Push in the detergent drawer.
  • Page 34 en Cleaning and servicing Open and remove the service flap. CAUTION - Risk of scalding! When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
  • Page 35 Cleaning and servicing en Insert the pump cap. Cleaning the drain pump Requirement: The drain pump is empty. → Page 33 Since water may remain in the drain pump, unscrew the pump cap carefully. Screw the pump cap as far as it will go. Clean the interior, the thread on 90°...
  • Page 36 en Cleaning and servicing Before the next wash To prevent unused detergent from flowing straight into the outlet in the next wash, run the Drain programme after you have emptied the drain pump. Turn on the water tap. Insert the mains plug. Switch on the appliance.
  • Page 37: Troubleshooting

    Troubleshooting en Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 38 en Troubleshooting Fault Cause and troubleshooting "E:30 / -80" Ensure that the pump cap is screwed in all the way ▶ into the appliance. The handle on the pump cap must be in a vertical position. → "Cleaning the drain pump", Page 35 The water pressure is low.
  • Page 39 Troubleshooting en Fault Cause and troubleshooting All other error codes. Malfunction Call the after-sales service. ▶ → "Customer Service", Page 46 "E:30/-20" Solenoid valve defective. Call the after-sales service. ▶ → "Customer Service", Page 46 Detergent dosage is too high. Reduce the amount of detergent for the next wash- ▶...
  • Page 40 en Troubleshooting Fault Cause and troubleshooting The door cannot Select a suitable programme for draining. ▶ be opened. → "Programmes", Page 24 Power failure. Open the door using the emergency release. ▶ → "Emergency release", Page 45 The water is not drain- Drain pipe or water outlet hose is blocked. ing.
  • Page 41 Troubleshooting en Fault Cause and troubleshooting The spin cycle runs The unbalanced load detection system eliminates an several times. imbalance by repeatedly redistributing the laundry. Not a fault – no action required. ▶ Note: When loading, where possible, place large and small items of laundry together in the drum. Different sized items of laundry distribute themselves better during the spin cycle.
  • Page 42 en Troubleshooting Fault Cause and troubleshooting Heavy foam build-up Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
  • Page 43 Troubleshooting en Fault Cause and troubleshooting Loud noises during Transit bolts have not been removed. the spin cycle. Removing the transit bolts ▶ Banging noises, rat- Foreign bodies have got into the drain pump. tling in the drain → "Cleaning the drain pump", Page 33 ▶...
  • Page 44 en Troubleshooting Fault Cause and troubleshooting The spin result is not Note: Where possible, mix large and small items in satisfactory. The laun- the drum. Different sized items of laundry distribute dry is too wet/too themselves better during the spin cycle. damp. Start the Spin programme.
  • Page 45: Emergency Release

    18.1 Removing the appliance → "Before using for the first time", Note: More detailed instructions for Page 19. use can be found on www.siemens- home.bsh-group.com or by scanning the QR code on the title page of this user manual. Turn off the water tap.
  • Page 46: Disposing Of Old Appliance

    en Customer Service 18.4 Disposing of old appli- Customer Service 19 Customer Service ance If you have any queries on use, are Customer Service Valuable raw materials can be re- unable to rectify faults on the appli- used by recycling. ance yourself or if your appliance needs to be repaired, contact Cus- WARNING tomer Service.
  • Page 47 Customer Service en Make a note of your appliance's de- tails and the Customer Service tele- phone number to find them again quickly.
  • Page 48 en Consumption values Consumption values 20 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456.
  • Page 49: Technical Specifications

    Technical specifications en Mains voltage 220-240 V, 50 Hz Minimum in- 10 A stallation protec- tion Nominal power 2300 W Power consump- ¡ Off mode: tion 0,10 W ¡ Left-on mode: 0,50 W Water pressure ¡ Minimum: 100 kPa (1 bar) ¡ Maximum: 1000 kPa (10 bar) Length of the wa- 150 cm ter inlet hose Length of the wa-...
  • Page 52 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001565884* 9001565884 (010820)

Table of Contents