Advertisement
A
NEUVIDEO
WebGUI Overview
• SCHEDULE:
The Schedule tab provides multiple ways to automate and schedule the powering on and off of any of the (8) power
ports on this unit.
• SYSTEM:
This tab provides system configuration options including changing the network settings, downloading/restoring saved
system configurations, modifying the username and password, system time setting, and updating the firmware.
1. Repeat Mode: Items in this section will
execute at their set times on the selected
days (Sunday through Saturday) every week
as long as they are marked as "Active".
2. Once Mode: Items in this section are
scheduled to occur a single time on a specific
date at the specified time. Each item will
automatically change to "None Active" after
they have been executed once.
NOTE: Each schedule item must be set as
"Active" for it to activate at the scheduled time.
1. Network: This section allows for setting
the unit to either Static or DHCP mode for its
IP information. When in Static mode, the IP,
Netmask, and Gateway may be set manually.
2. Web User Setting: This section allows
for the login password to be changed. The
username is "admin" and the default password
is also "admin".
3. System Time: This section allows user to
set the system time and date.
NOTE: The new setting will not take effect
until "Save" is clicked.
4. Download Current Configuration: This
section allows the user to download the
current system configuration to a local PC for
restoration later.
5. Restore Configuration: This section allows
user to restore a previously downloaded
system configuration.
6. Firmware Upgrade: This section allows for
new firmware to be uploaded into the unit.
8
WebGUI Control
Advertisement
