Sending A Fax Preferentially (Priority Send) - Epson WF-C5790DWF User Manual

User's Guide
ADF 2-Sided
Continuous Scan(ADF)
Fax Send Settings
Direct Send
Priority Send
Send Fax Later
Add Sender Information
Notify Send Result
Transmission Report
Backup
Related Information
"Sending Different Size Documents Using ADF (Continuous Scan(ADF))" on page 142
&
"Sending Many Pages of a Monochrome Document (Direct Send)" on page 140
&
"Sending a Fax Preferentially (Priority Send)" on page 140
&
"Sending Faxes in Monochrome at a Specified Time (Send Fax Later)" on page 141
&
Scans both sides of originals placed in the ADF and sends a monochrome fax.
Sending faxes by placing originals one by one, or by placing originals by size, you can send
them as one document at their original sizes. See the related information below on this topic.
Sends a monochrome fax while scanning the originals. Since scanned originals are not stored
temporarily in the printer's memory even when sending a large volume of pages, you can avoid
printer errors due to a lack of memory. Note that sending using this feature takes longer than
not using this feature. See the related information below on this topic.
You cannot use this feature when:
❏ Sending a fax using the ADF 2-Sided option
❏ Sending a fax to multiple recipients
Sends the current fax before other faxes waiting to be sent. See the related information below
on this topic.
Sends a fax at a time you specified. Only a monochrome fax is available when using this option.
See the related information below on this topic.
❏ Add Sender Information
Select the position where you want to include the header information (sender name and fax
number) in the outgoing fax, or not to include the information.
- Off: Sends a fax with no header information.
- Outside of Image: Sends a fax with header information in the top white margin of the fax.
This keeps the header from overlapping with the scanned image, however, the fax received
by the recipient may be printed across two sheets depending on the size of the originals.
- Inside of Image: Sends a fax with header information approximately 7 mm lower than the
top of the scanned image. The header may overlap with the image, however, the fax
received by the recipient will not be split into two documents.
❏ Fax Header
Select the header for the recipient. To use this feature, you should register multiple headers
in advance.
❏ Additional Information
Select the information you want to add. You can select one from Your Phone Number and
Destination List.
Sends a notification after you send a fax.
Prints a transmission report after you send the fax.
Print on Error prints a report only when an error occurs.
Saves a backup of the sent fax that is scanned and saved to the printer's memory automatically.
Faxing
145