Sending Faxes On Demand (Using Polling Send/Bulletin Board Box) - Epson WF-C5790DWF User Manual

Hide thumbs Also See for WF-C5790DWF:
Table of Contents

Advertisement

User's Guide
4. Select the Fax Settings tab, and then make settings such as the resolution and the sending method as
necessary.
5. When you hear a fax tone, tap
Note:
When a number is dialed using the connected telephone, it takes longer to send a fax because the printer performs
scanning and sending simultaneously. While sending the fax, you cannot use the other features.
6. When sending is complete, remove the originals.
Related Information
"Placing Originals" on page 36
&
"Fax Settings" on page 144
&

Sending Faxes On Demand (Using Polling Send/Bulletin Board Box)

If you store a monochrome document which has up to 100 pages in the Polling Send box or one of the bulletin
board boxes, the stored document can be sent upon request from another fax machine that has a polling receive
feature.
You can store one document in the Polling Send box.
You can register up to 10 bulletin boards, and store one document in each registered bulletin board. Note that the
fax machine of the recipient must support the subaddress/password feature.
Related Information
"Setting the Polling Send Box" on page 138
&
"Registering a Bulletin Board Box" on page 139
&
"Storing a Document in the Polling Send/Bulletin Board Box" on page 139
&
"Sending a Fax with a Subaddress(SUB) and Password(SID)" on page 142
&
Setting the Polling Send Box
1. Select Fax Box > Polling Send/Board from the home screen.
2. Select Polling Send, tap
Note:
If a password entry screen is displayed, enter the password.
3. Make the appropriate settings, such as Notify Send Result.
Note:
If you set a password in Box Open Password, you will be asked to enter the password from the next time you open the
box.
4. Select OK.
Faxing
x
, and then hang up the handset.
, and then select Settings.
138

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wf-c5790 series

Table of Contents