Mounting The Dome Camera Using The Side Cable Entry - Motorola Avigilon 1.3C-H4SL-D Installation Manual

Mounting the Dome Camera Using the Side Cable Entry

Perform the following steps if you will be mounting to a surface with the required cables coming out of an
external conduit pipe. Use this procedure if the mounting surface cannot be easily cut, or when cables must
be brought along the outside of the mounting surface.
1. Use the mounting template to drill four mounting holes into the mounting surface.
Make sure the mounting template is aligned to where the conduit will enter the mounting adapter.
2. Pull the required cables through the conduit.
3. Slide the side cable cover off the mounting adapter.
Mounting the Dome Camera Using the Side Cable Entry 9