NPort IA and IAW5000A-I/O
Power On Setting: You may configure DI channels in Event Counter mode whether or not counting
begins when powering up.
Save Counter On Power Failure: The NPort IA5000A-I/O and IAW5000A-I/O will automatically save the
counter value when there is a power failure if this function is selected.
Reset Counter: Select this function to reset the counter.
You can apply the DI settings to all DI Channels by selecting the Apply to all DI Channels checkbox.
The DI channel's Alias Name and logic definition can also be configured on this page.
DI Channel Specifications
DO Channels
On the I/O Setting: DO (Digital Output) Channels page; you can configure each DO channel by clicking
on the channel.
Web Console: Modbus Address Mapping & I/O Setting
11-4