Overview The NPort W2150A/W2250A wireless device servers are an ideal choice for connecting serial devices or Ethernet devices, including PLCs, meters, and sensors, to an IP-based wireless LAN or Ethernet LAN. Features • Link any serial device to an IEEE 802.11a/b/g/n network •...
Hardware Introduction The NPort W2150A models have one serial port; the NPort W2250A models have two serial ports. Both models support RS-232/422/485 operation with DB9 connectors and include one 10/100M Ethernet port. NPort W2150A/W2150A-T NPort W2250A/W2250A-T Reset Button: The reset button is used to load the factory default settings.
Page 4
Name Color Function Steady on: Wireless enabled Blinking: The NPort can’t establish a WLAN Green WLAN connection with AP (Infrastructure) or station (Ad-Hoc) Wireless not enabled Orange The serial port is receiving data Serial 1 Green The serial port is transmitting data Serial 2 No data is flowing to or from the serial port 1 Red -...
NOTE Do not use the 1 kΩ setting while in RS-232 mode. Doing so will degrade the RS-232 signals and reduce the effective communication distance. First-Time Hardware Installation STEP 1: After removing the NPort W2150A/W2250A from the box, use a crossover Ethernet cable to connect the NPort’s RJ45 Ethernet port directly to your computer’s Ethernet port.
Wizard in the left navigation panel. The wizard will prompt you to configure the IP address, SSID, and security mode. For other settings, use the factory defaults or modify the settings for your application. For software installation, download the relative utilities from Moxa's website: https://www.moxa.com/support/support_home.aspx?isSearchShow=1 •...
Page 7
EN 55032 Class A/EN 55035 ETSI EN 301 489-17, ETSI EN 301 489-1 FCC: FCC Part 17 Subpart B, Class A FCC Part 15 Subpart B, Class A Safety UL 60950-1 LVD: EN 60950-1 DSPR: ARIB-STD 33, ARIB-STD 66 - 7 -...