Delete Characters On Output Result - Inateck BCST-43 Instruction Manual

(*)Show suffix
Hide prefix

Delete Characters on Output Result

When outputting scanning result, the BCST-43 supports deleting 0–99 digit(s)
front characters and 0–99 digit(s) end characters from a barcode.
Steps to set deleting front 12-digit characters and end 4-digit characters are as
below:
1. Read the "Enter Setup" barcode.
2. Read the "Set the Number of Front Digit(s) to be Deleted" barcode.
3. Scan the "1 Digit" barcode.
4. Scan the "2 Digits" barcode.
5. Scan the "Set the Number of End Digit(s) to be Deleted".
6. Scan the "4 Digits" barcode.
7. Scan the "Exit and Save" barcode.
Set Number of Front Digit(s) to be
Deleted
(*) 0 Digit
Enter Setup
Set Number of End Digit(s) to be
Exit and Save
Set suffix
Hide suffix
Deleted
1 Digit
38