Delete Characters On Output Result - Inateck BS02004 Instruction Manual

Enter Setup
(*)Show suffix Set suffix
Hide prefix Hide suffix

Delete Characters on Output Result

When outputting scanning result, the BS02004 supports deleting 0–99 digit(s)
front characters and 0–99 digit(s) end characters from a barcode.
Steps to set deleting front 12-digit characters and end 4-digit characters are as
below:
1. Read the "Enter Setup" barcode.
2. Read the "Set the Number of Front Digit(s) to be Deleted" barcode.
3. Scan the "1 Digit" barcode.
4. Scan the "2 Digits" barcode.
5. Scan the "Set the Number of End Digit(s) to be Deleted".
6. Scan the "4 Digits" barcode.
7. Scan the "Exit and Save" barcode.
Set Number of Front Digit(s) to be Set Number of End Digit(s) to be
Deleted Deleted
(*) 0 Digit 1 Digit
27
Exit and Save