Future light DMH-200 User Manual page 37

For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the
safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The maximum ambient temperature T
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.
WEEE Directive
When to be definitively put out of operation, take the unit(s) to a local recycling plant for a disposal
which is not harmful to the environment. Do not dispose of as municipal waste. Contact your retailer or
local authorities for more information.
EU Declaration of Conformity
Steinigke Showtechnic GmbH hereby declares that this product (FUTURELIGHT DMH-200 LED Moving
Head, Artikel-Nummer 51841975) is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC. The complete Declaration of Conformity can be found at
www.steinigke.de.
= 45° C must never be exceeded.
a
37/64
00107960, Version 1.0