Motherboard Installation - Supermicro X11DPG-SN User Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)
Tools Needed
Location of Mounting Holes
Notes: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws (10)
USB0/1(3.0)
LE1
JWD1
JUSB
IPMI_LAN
JCOM1
LEDBMC
UM5 LEDM1
JSIOM
U60
JBT1
BIOS
LICENSE
IPMI CODE
CPU1
MAC CODE
X11DPG-SN
REV:1.00
REV:1.00
BAR CODE
CPU2
BT1
JL1
JF1
23
Chapter 2: Installation
Standoffs (8)
Only if Needed
JPW2
FAN H
FAN G
JPW7
FAN F
FAN E
FAN 1