Table of Contents
Advertisement
Super X11DPG-SN User's Manual
Motherboard Features
CPU
•
Dual Intel Xeon Scalable-SP and 2nd Gen Intel Xeon Scalable-SP processors (Socket P up to 205 TDP); each processor
supports Socket P and Intel® UltraPath Interconnect (3 UPI) links of up to 10.4 G/s
Note: Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers. Refer
to the block diagram on page 18 to determine which slots or devices may be affected.
Memory
•
Integrated memory controller supports up to 4TB of 3DS LRDIMM/LRDIMM/RDIMM DDR4 ECC 2933*/2666/2400/2133
MHz memory in 16 memory slots.
Notes: 1. Up to 5TB memory with DCPMM modules installed. 2. Support for 2933MHz memory is dependent on
the CPU SKU.
DIMM Size
•
Up to 128GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
•
Intel C621
Expansion Slots
•
4 PCI-E 3.0 (x16) expansion slots for GPU support
•
1 PCI-E 3.0 (x8) expansion slot
•
1 PCI-E 3.0 (x16) expansion slot for SIOM support
•
2 SMC-proprietary SPEC slots (JPCIE1_1, JPCIE1_3)
•
2NVMe (x4) PCI-E slots for PCI-E storage devices
Network
•
SIOM Network Controller
BaseBoard Management Controller (BMC)
•
ASPEED AST 2500 Baseboard Management Controller (BMC) supports IPMI 2.0
•
One (1) IPMI LAN located on the rear IO backpanel
Graphics
•
Graphics controller via ASPEED AST2500
I/O Devices
•
JCOM Port
•
SATA 3.0
•
RAID
Motherboard Features
•
One (1) serial-port header
•
Total of 10 SATA 3 ports divied up as follows:
•
Eight (8) SATA 3.0 ports supported by Intel PCH C621 (I-SATA 0-7)
•
Two (2) SATA 3.0 (S-SATA0, S-SATA1)
•
RAID (0, 1, 5, 10)
14
Advertisement
Table of Contents
