Super X11DPG-SN User's Manual
Preparing the CPU Socket for Installation
This motherboard comes with the CPU socket pre-assembled in the factory. The CPU socket
contains 1) a dust cover, 2) a socket bracket, 3) the CPU (P0) socket, and 4) a back plate.
These components are pre-installed on the motherboard before shipping.
Removing the Dust Cover from the CPU Socket
Remove the dust cover from the CPU socket, exposing the Non-F Model CPU socket and
socket pins as shown on the illustration below.
Note: Do not touch the socket pins to avoid damaging them, causing the CPU to
malfunction.
CPU Socket w/Dust Cover On
Dusk Cover
Remove the dust cover from
the CPU socket. Do not
touch the socket pins!
CPU Socket
30
Socket Pins