Supermicro X11DPG-SN User Manual page 47

NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins
11 and 12 of JF1, and LAN port 2 is on pins 9 and 10. Attach the NIC LED cables here to
display network activity. Refer to the table below for pin definitions.
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable to pin 14 to
show hard drive activity status. Refer to the table below for pin definitions.
1
Power Button
Reset Button
3.3V
Blue LED
3.3V Stby
3.3V Stby
3.3V Stby
3.3V
x
NMI
19
LAN1/LAN2 LED
Pin Definitions (JF1)
Pin# Definition
9 NIC 2 Activity LED
11 NIC 1 Activity LED
HDD LED
Pin Definitions (JF1)
Pins Definition
13 3.3V Stdby
14 HDD Active
2
Ground
Ground
Power Fail LED
OH/PWR Fail/Fan Fail LED
NIC2 Active LED
NIC1 Active LED
3
HDD LED
PWR LED
x
Ground
20
47
1
2
Chapter 2: Installation
1. NIC2 LED
2. NIC1 LED
3. HDD LED