Table of Contents
Advertisement
Super X11DPG-SN User's Manual
CMOS Clear
JBT1 is used to clear CMOS and will also clear any passwords. Instead of pins, this jumper
consists of contact pads to prevent accidentally clearing the contents of CMOS.
To Clear CMOS
1. First power down the system and unplug the power cord(s).
2. Remove the cover of the chassis to access the motherboard.
3. Remove the onboard battery from the motherboard.
4. Short the CMOS pads with a metal object such as a small screwdriver for at least four
seconds.
5. Remove the screwdriver (or shorting device).
6. Replace the cover, reconnect the power cord(s), and power on the system.
Note: Clearing CMOS will also clear all passwords.
Do not use the PW_ON connector to clear CMOS.
USB0/1(3.0)
LE1
JWD1
JUSB
IPMI_LAN
JCOM1
LEDBMC
UM5
LEDM1
JSIOM
U60
1
JBT1
BIOS
LICENSE
IPMI CODE
CPU1
MAC CODE
X11DPG-SN
REV:1.00
REV:1.00
BAR CODE
CPU2
BT1
JL1
JF1
JPW2
FAN H
FAN G
JPW7
FAN F
FAN E
FAN 1
60
JBT1 contact pads
1. Clear CMOS
Advertisement
Table of Contents
