Supermicro X11DPG-SN User Manual page 45

Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be configured to function as a suspend
button (with a setting in the BIOS - see Chapter 4). To turn off the power when the system
is in suspend mode, press the button for 4 seconds or longer. Refer to the table below for
pin definitions.
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Use a cable to connect the
two pins to a hardware reset switch on the computer case to reset the system. Refer to the
table below for pin definitions.
1 Power Button
Reset Button
2
3.3V
Blue LED
3.3V Stby
3.3V Stby
3.3V Stby
3.3V
x
NMI
19
Power Button
Pin Definitions (JF1)
Pins Definition
1 Signal
2 Ground
Reset Button
Pin Definitions (JF1)
Pins Definition
3 Reset
4 Ground
1 2
Ground
Ground
Power Fail LED
OH/PWR Fail/Fan Fail LED
NIC2 Active LED
NIC1 Active LED
HDD LED
PWR LED
x
Ground
20
45
Chapter 2: Installation
1. PWR Button
2. Reset Button