Table of Contents
Advertisement
Super X11DPG-SN User's Manual
Quick Reference Table
Jumper
Description
JBT1
CMOS Clear
JPME1
ME Recovery
JPME2
ME Manufacturing Mode
JWD1
Watch Dog
Connector
Description
BT1
Onboard Battery
FAN1 ~ FAN4
System/CPU Fan Headers (FAN1: CPU Fan)
FANA ~ FANH
System/CPU Fan Headers
IPMI_LAN
IPMI-Dedicated LAN Port
I-SATA0~3/JS1
Intel® PCH SATA 3.0 Ports
I-SATA1~4/JS2
Intel® PCH SATA 3.0 Ports
JCOM1
COM port
JD1
Speaker/buzzer header (optional) (used in conjunction with an external speaker/buzzer)
JF1
Front Control Panel Header
JF2
Front Panel LAN3 and LAN4 activity LEDs from SIOM
JIPMB1
System Management Bus Header for IPMI2.0
Chassis Intrusion Header. (Note: Please connect a cable from the Chassis Intrusion header at JL1
JL1
to the chassis to receive an alert via IPMI.)
P2_NVMe0, P2_NVMe1; On-Board NVMe 0 and 1 for high speed PCI-E storage devices on CPU2
JNVME1, JNVME2
*Note: When installing an NVMe device on a motherboard, please be sure to connect the first
NVMe port (JNVMe1) first for your system to work properly.
JPCIE1_1 SXB1A
SMC Proprietary Slot1
JPCIE1_2 SXB1B
PCI-Express 3.0 X16 slot from CPU1
JPCIE1_3 SXB1C
SMC Proprietary Slot1
JPCIE2
PCI-Express 3.0 X16 slot from CPU2
JPCIE3
PCI-Express 3.0 X16 slot from CPU1
JPCIE4
PCI-Express 3.0 X16 slot from CPU2
JPCIE 5
PCI-Express 3.0 X8 slot from CPU2
JPW1
SMCI-proprietary main power connector
JPW2
Power supply sideband connector
JPW3 - JPW7
8-pin power connectors used for GPU devices
JSIOM
PCI-Express 3.0 x16 slot from CPU1 for SMCI SIOM add-on module support
JSTBY1
Standby Power Connector
JTPM1/PORT80
Port 80 connector for Trusted Platform Module (TPM)
S-SATA0
Intel® PCH SATA 3.0 port
S-SATA1
Intel® PCH SATA 3.0 port
S-SGPIO1
Serial Link General Purpose Input/Output Header 1 for S-SATA ports
USB0/1 (3.0) (JUSB)
Back panel Universal Serial Bus (USB) 3.0 port
UID (JUIDB1)
Unit Identifier (UID) Switch
Default Setting
Open (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
12
Advertisement
Table of Contents
