Supermicro X11DPG-SN User Manual page 39

DIMM Installation
1. Insert DIMM modules following the
population guide in the previous section.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press on both
ends of the module straight down into the
slot until the module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Module Removal
Press the release tabs on both ends of the
DIMM socket to release the DIMM module from
the socket as shown in the drawing on the right.
Warnings: 1. Please do not use excessive force when pressing the release tabs on the ends
of the DIMM socket to avoid causing any damage to the DIMM module or the DIMM socket.
2. Please handle DIMM modules with care. Carefully follow all the instructions given on Page
1 of this chapter to prevent ESD-related damages to your memory modules or components.
USB0/1(3.0)
LE1
JWD1
IPMI_LAN
JCOM1
LEDBMC
UM5 LEDM1
JBT1
IPMI CODE
BT1
JL1
JF1
Notches
Release Tabs
39
Chapter 2: Installation
JUSB
JSIOM
U60
BIOS
LICENSE
CPU1
MAC CODE
X11DPG-SN
REV:1.00
REV:1.00
BAR CODE
JPW2
FAN H
CPU2
FAN G
JPW7
FAN F
FAN E
FAN 1
Press both notches
straight down into
the memory slot.