Gas Connection - Atag CG9271MB Instructions For Use Manual

INSTALLATION

Gas connection

Only for France:
GB 32
Attention
The type of gas, connection pressure and the country for which the unit
was designed are listed on the information plate.
This is a category 3 appliance.
• We recommend that the hob be connected by means of a fixed
pipe. Connection using a specially designed safety hose is also
permitted.
• Behind an oven use must be made of a pipe made entirely out of
metal.
• A safety hose may not be bent and must not come into contact
with moving parts of kitchen units.
• In all cases the connection tap for the appliance must be positioned
such that it is easily accessible.
• Before using the appliance for the first time check the
connections using water and washing-up liquid to ensure that
there are no gas leaks.
Preparing the hob
Fit the elbow supplied to the appliance's gas connection.
1/2" ISO 228 (straight)
1/2" ISO 10226-1 (conical)
Sealing ring
1/2" ISO 228 (straight)
1/2" ISO 228 (straight)
Sealing ring