Residual Heat Indicator; Zone Function - Atag CG9271MB Instructions For Use Manual

OPERATION CERAMIC

Residual heat indicator

Zone function

Attention
• The hob saves the latest settings with regard to the extra zone
element. When switching the hob on again, the hob will resume
using the saved settings.
Tip
• You can switch off the hob if the (child) lock is set or the pause
mode is active.
A cooking zone that has been used will retain heat for some time after
it has been switched off. An 'H.' appears in the display as long as the
cooking zone is hot.
The 'extra zone element' function can be used to activate an extra zone
element. Which elements may be activated, is shown by the graphics
on the ceramic top. Different options are available, often a 2
can be activated, sometimes also a 3
Activating an extra zone element
The hob is switched on and a setting is chosen.
• Touch the extra zone element button.
The extra zone element indicator light illuminates.
• Touch the + button or - button of the desired cooking zone.
Beside the display of the cooking zone, the 2
appears. The extra zone element is activated immediately. If the +
button or - button is not pressed, the red light to the right of the
extra zone element button wil flash for 3 seconds and then turns off.
A single beep is heard.
rd
element.
1 st zone element icon
nd
2 zone element icon
nd
element
nd zone element icon
GB 13