Atag CG9271MB Instructions For Use Manual page 58

MAINTENANCE
GB 24
Cleaning removable burner components
The removable wok burner parts can best be cleaned using a mild
cleaning agent and a soft cloth. In the case of stubborn stains you can
soak the parts in hot suds. Never use scouring powder, scouring pads,
sharp objects or aggressive cleansing agents.
• Burner parts should not be cleaned in the dishwasher. The parts
may be damaged by the dishwasher detergent!
• Do not use too much water as this can penetrate into the burner or
ventilation openings.
Clean the spark plugs preferably with a cloth. Do this carefully. If too
much pressure is applied, the distance from the point of the sparkplug
to the burner may change, causing the burner to ignite poorly or not at
all. The sparkplug will only operate correctly in a dry environment. If the
plug is very dirty, you may clean the point with a tiny brush.
1
• Assemble the burner parts using the guide ridges
2
3
1. Burnercap inside
4
2. Burnercap outside
5
3. Positioning notch
4. Air ring
5. Burnerhead
6. Thermocouple
6
7. Sparkplug
7
Brass wok burner parts
A few parts of the work burner are made from brass. It is normal for the
colour of the brass to change as a result of the high temperatures that
occur when cooking with a wok.