Atag CG9271MB Instructions For Use Manual page 51

OPERATION CERAMIC
Switching off the egg timer
• Press the On/Off button (when no cooking zones are active).
• Press the + button and - button of the kitchen / egg timer
simultaneously.
The dot next to the set time illuminates.
• Touch and hold the - button until "01." shows in the display. Then
press the - button again.
The egg timer is now in stand-by mode. The egg timer automatically
switches off after 10 seconds.
Assigning and switching on the kitchen timer
The hob is switched on. The kitchen timer can only be linked to cooking
zones that are activated.
• Touch the + button and - button simultaneously twice to jump to
the first activated cooking zone clockwise (in this example, the
kitchen timer for the front left zone is on). Every time the + button
and - button are pressed simultaneously again, it will jump to the
kitchen timer of the next activated zone, which you can set and
view.
• Use the - button and the + buttons to set the desired cooking time.
The kitchen timer can be set until the dot next to the set time
disappears. The red light for the kitchen timer of the active cooking
zone continues flashing. If you do not use the - button and the +
button to set a time, the kitchen timer will automatically switch off
after 10 seconds.
• Repeat the above steps to set the time for another switched on
cooking zone.
Attention
If several kitchen timers/egg timers are running, the kitchen timer/egg
timer display will always show the kitchen timer/egg timer that has the
least time remaining.
The cooking zone indicator light flashes. The remaining kitchen timer/
egg timer indicator lights of active kitchen timers/egg timers are
statically illuminated.
Switching off the kitchen timer
• Repeatedly press the + button and - button simultaneously of the
kitchen / egg timer to select the timer you wish to switch off.
The dot next to the set time illuminates.
GB 17