HomeMatic HmIP-FAL230-C6 Installation Instructions And Operating Manual page 54

Floor heating actuator – 6 channels, 230 v
Hide thumbs Also See for HmIP-FAL230-C6:
Table of Contents

Advertisement

Available languages

Available languages

Start-up
and the lives of other users of the electrical sys-
tem.
Incorrect installation also means that you are running the
risk of serious damage to property, e.g. because of a fire.
You may be personally liable in the event of injuries or
damage to property.
Contact an electrical installer!
*Specialist knowledge required for installation:
The following specialist knowledge is particularly important during
installation:
The "5 safety rules" to be used: Disconnect from mains;
Safeguard from switching on again; Check that system is
deenergised; Earth and short circuit; Cover or cordon off
neighbouring live parts;
Select suitable tool, measuring equipment and, if neces-
sary, personal safety equipment;
Evaluation of measuring results;
Selection of electrical installation material for safeguard-
ing shut-off conditions;
IP protection types;
Installation of electrical installation material;
Type of supply network (TN system, IT system, TT system)
and the resulting connecting conditions (classical zero
balancing, protective earthing, required additional meas-
ures etc.).
For installing the floor heating actuator into a
power distribution panel it has to be mounted in
accordance with VDE 0603, DIN 43871 (low-
54

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Hmip-fal230-c10

Table of Contents