HomeMatic HmIP-FAL230-C6 Installation Instructions And Operating Manual page 48

Hazard information
The device may only be operated in dry and dust-
free environment and must be protected from the
effects of moisture, vibrations, solar or other meth-
ods of heat radiation, cold and mechanical loads.
The device is not a toy; do not allow children to
play with it. Do not leave packaging material lying
around. Plastic films/bags, pieces of polystyrene,
etc. can be dangerous in the hands of a child.
We do not assume any liability for damage to
property or personal injury caused by improper
use or the failure to observe the hazard
information. In such cases, any claim under
warranty is extinguished! For consequential
damages, we assume no liability!
The device may only be used for fixed installa-
tions. The device must be securely attached with-
in a fixed installation.
The actuator is part of the building installation.
The relevant national standards and directives
must be taken into consideration during planning
and set-up. The device has been designed solely
for operation on a 230 V/50 Hz AC supply. Only
qualified electricians (to VDE 0100) are permitted
to carry out work on the 230 V mains. Applicable
48