DeLorme Earthmate PN-40 User Manual page 35

when available. For example, if you have DeLorme Topographic Data and Aerial Imagery (DOQQ)
coverage for the same area, the data type with the highest priority displays on the map based on
the default Data Layering settings. The default order is as follows:
1. Draw Layers
2. GIS Layers (XMap only)
®
3. User Raster Data (XMap only)
4. ImageReg (XMap only)
5. High-resolution Cities
6. Color Aerial Imagery
7. Aerial Imagery (DOQQ)
8. USGS Quads (3DTQ)
9. NOAA Nautical Charts
10. Satellite Imagery
11. DeLorme Topographic Data
Modify the default layering order with the Data Layering option in the Map Setup screen.
1. From the Map Page, press MENU.
2. Use the arrow keypad to highlight Map Setup and press ENTER.
3. Highlight the Data Layering button and press ENTER. The Data Layering screen displays a list
of all of the data types loaded on the Earthmate PN-40. The data type at the top of the list has
the highest priority. The data type at the bottom of the list has the lowest priority.
4. Highlight the data type that you want to move up or down in the list, and then press the arrow
keypad and highlight the up or down arrow key to the right of the data types.
5. Press ENTER to move the data type. If you want to move the data type more than one level
away from its current position, press ENTER as many times as it takes to move the data type
so it is in the order you want it.
6. Press the arrow keypad to the left to return to the layering list.
7. Repeat steps 4-6 for each data type you want to reorder in the list.
The Map Page
Data Layering menu options
33