Using The Buttons On The Earthmate Pn-40; In/Out; Page; Menu - DeLorme Earthmate PN-40 User Manual

To turn off the Earthmate PN-40, press the Power button and then press the ENTER button to
confirm you want to turn off the Earthmate PN-40.
Step 3 — Using the Buttons on the Earthmate PN-40
The buttons on the Earthmate PN-40 give you access to all of the functions on the device.

In/Out

Use the IN and OUT button to zoom the map in or out or scroll through a list.
• Press the IN (left) side of the button once to zoom the map in one level and show more detail.
• Press and hold the IN side of the button to zoom the map in to its maximum level.
• Press the OUT (right) side of the button once to zoom the map out one level and show less
detail.
• Press and hold the OUT side of the button to zoom the map out to its maximum level.
• Press IN or OUT to scroll backward or forward through a list.

Page

Use the PAGE button to scroll through the enabled pages on the Earthmate PN-40. The default
page button sequence is:
• Satellites
• Map
• Compass
• Trip Info
• Route Directions (available when navigating)
For an overview of what you can view and do on each page, as well as each page's menu functions,
see Appendix A on page 75.

Menu

The MENU button gives you access to many functions. Some menus are divided into top and
bottom sections that are separated by a line. The items in the top section are specific to the active
page. The items in the bottom section are standard menu options that are available from any page.
Getting Started
Note: If the Earthmate PN-40
is connected to your computer,
the first screen you see is
the Connect to Computer
screen. For more information,
see Connecting to Your
Computer on page 6.
Tip: Use the Device Setup/
Page Order settings to add,
remove, or reorder the pages
that display when you press
the PAGE button. For more in-
formation, see the To Modify
the Page Order Settings
section on page 72.
3