DeLorme Earthmate PN-40 User Manual page 30

28
Information Field Option
Distance to Next Stop
Distance to Next Turn
Elevation: Altimeter
Elevation: GPS
Elevation: Maximum
Elevation: Minimum
ETA at Finish
ETA at Next Turn
ETA at Next Stop
Finish
GPS Accuracy
GPS Status
Heading
Description
The distance from the current location to the next stop in the
route.
The distance from the current location to the next turn in the
route.
The altitude (height) above or below sea level based on the
barometric altimeter reading. If the altimeter is calibrating, a
red exclamation point displays. If the altimeter is disabled,
dashes display.
The altitude (height) above or below sea level based on the
GPS reading.
The maximum elevation achieved. Expressed in distance.
This field may be reset when you clear Trip Info.
The minimum elevation achieved. Expressed in distance.
This field may be reset when you clear Trip Info.
The Estimated Time of Arrival at the route finish. Expressed
as hours:minutes AM/PM. ETA is based on the current
device time, not on the local time at the destination.
The Estimated Time of Arrival at the next turn in the route.
Expressed as hours:minutes AM/PM. ETA is based on the
current device time, not on the local time at the turn.
The Estimated Time of Arrival at the next stop in the route
Expressed as hours:minutes AM/PM. ETA is based on the
current device time, not on the local time at the next stop.
The Finish label as it appears in the route directions.
The calculated accuracy of the GPS. Expressed in distance.
The current status of your GPS device. No Fix, 2-D, or 3-D.
The current direction of travel. Expressed in degrees. If