To Reset The Information Fields; Turn Imagery On/Off - DeLorme Earthmate PN-40 User Manual

Information Field Option
Trip: Time Total
Velocity Made Good
Vertical Speed

To Reset the Information Fields

The Map menu offers a Restore Info Defaults option that allows you to change the custom
settings you made to the Show Info Fields, Arrange Info Fields, and Change Info Fields drop-down
lists back to their default settings.
Option
Show Info Fields
Arrange Info Fields
Change Info Fields
Use the steps below to reset the information fields to their default settings.
1. From the Map Page, press MENU.
2. Use the arrow keypad to highlight Info Fields and press ENTER.
3. Highlight Restore Info Defaults and press ENTER.
Note: If Show Info Fields displays, the information fields are hidden. Press ENTER to display
the information fields.

Turn Imagery On/Off

You can turn on imagery to display it on the map or turn it off if you do not want to display it on the
Description
The total time the GPS has been tracking, both moving and
stopped.
This information may be reset when you clear Trip Info.
The component of the current speed that is in the direction of
the route destination. Expressed in distance per unit of time.
The current rate of vertical travel for the device. Expressed
in distance per unit of time.
Default Setting
Selected
2 narrow fields (when tracking)
4 narrow fields (when navigating)
Speed, Heading (when tracking)
Next Turn, Dist to Finish, Time to Turn, Dist to Turn
(when navigating)
The Map Page
31