DeLorme Earthmate PN-40 User Manual page 29

field options display.
5. Use the arrow keypad to select the information field and press ENTER.
6. Press QUIT to exit Change Info mode.
The available information fields include:
Information Field Option
Back on Course
Battery Life
Bearing
Coordinates: Primary
Coordinates: Secondary
Course
Device Odometer
Distance to Finish
Description
The direction of travel needed to return to the route while
continuing in the direction of the destination. Expressed in
degrees.
The percentage of battery power that remains for the
Earthmate GPS PN-40.
The direction of travel from the current location to the
destination (finish or next stop). Expressed in degrees.
Displays a green arrow pointing in the direction of the next
waypoint or route point. The arrow is grayed out when no
movement is reported by the device. It is green when the
device is moving.
The coordinates for the current GPS location, cursor
position,or map center in the primary format. The default is
Lat/Lon. You can change the format in Device Setup>
Units>Coordinates: Primary.
The coordinates for the current GPS location, cursor
position,or map center in the secondary format. The default
is UTM/UPS. You can change the format in Device Setup>
Units>Coordinates: Secondary.
The direction of travel on a route from the starting location
to the destination (finish or next stop). Expressed in
degrees.
The total distance traveled in all trips.
The distance from the current location to the route finish.
The Map Page
Notes:
• The information fields you
select may be abbreviated
on the screen. For example,
Velocity Made Good displays
as VMG.
• When information is not
available (for example, the
Distance to Finish informa-
tion field is only pertinent
when navigating), dashes
(- -) display in the applicable
field.
27