Advertisement
SEC TIONS
Table of Contents
InSTallaTIon
Step 3 – Power ON the Combiner
• Turn on all the PCs.
• Connect the power supply and power on the combiner
(approximate boot time is 30 seconds).
• The combiner boots into Tile view-mode,
where all sources are presented equally on the
screen.
Note: In case no picture is presented af ter
powering on the combiner, connect an alternate
display to the combiner's display console port, or
perform a reset to factory default.
HSL Secure KVM Combiner Quick Setup Guide
1
2
PC #4
Speakers
PC #3
Note: 4 channel product illustrations shown throughout this manual are applicable
to other KVM Combiner models.
3
Move mouse
to switch PCs
PC #2
PC #1
KVM COMBINER
KVM COMBINER
Single
Keyboard & Mouse
4
Multiple Sources
SECURE
SECURE
5
Advertisement
