Advertisement
SEC TIONS
Table of Contents
oPeRaTIon
5 .5 Freeze channel layer
In scenarios where a specific channel window has to remain on top of others, for example when a live camera has to be constantly viewed, it is
possible to freeze the selected channel window and pinpoint its position so that it remains on top when switching between active sources.
#
Action Description
1
Enter System Mode
2
Switch to Tile view
Rearrange channels as described in the
previous steps
3
Example: place the resized channel (#2)
on top of another channel window
4
Save a custom preset to 1/2/3 button
5
Freeze channel layer
6
Switch Active Channels
7
Toggle off Freeze channel #2
HSL Secure KVM Combiner Quick Setup Guide
1
Keyboard
CTRL | CTRL | o
CTRL | CTRL | q
CTRL | CTRL | F11 | F | 2
from now on, channel #2 window will
remain on top.
CTRL | CTRL | 1-16
CTRL | CTRL | F11 | F | 2
2
3
Mouse
Click the side-mouse button to toggle
between System / User modes.
Click the side-mouse button to toggle
between System / User modes.
In System mode: Click "Tile" on the
operation-taskbar.
on the operation-taskbar, long press the
"1" or "2" or "3" button for 3 seconds to
save your preset.
4
Touch Screen
In Scale view: Tap 4 times on the enlarged
window.
In Tile view: Touch and hold the uppermost
right corner of the screen for 4 seconds.
<you should already be in Tile view>
24
Advertisement
