Advertisement
SEC TIONS
Table of Contents
oPeRaTIon
5 .6 Presentation mode:
In presentation mode, when changing active channels, every channel is automatically enlarged to full screen size.
once in full screen, use the key sequence CTRL | CTRL | Channel# (1-16) or push the front panel buttons to switch back to Tile mode and then
repeat the CTRL | CTRL | Channel# (1-16) sequence to enlarge another channel (see example below).
#
Action Description
1
Switch to Tile View
Presentation mode ON; Enlarge each
channel to full screen when changing
2
active source using
CTRL | CTRL | Channel# (1-6)
Change Active Source
Note: sources can also be switched by
3
using the combiner's front panel push
buttons .
4
*Presentation mode OFF
HSL Secure KVM Combiner Quick Setup Guide
1
Keyboard
CTRL | CTRL | q
CTRL | CTRL | p
Example:
enlarge Channel#1
CTRL | CTRL | 1
Revert to Tile View
CTRL | CTRL | 1-16
---------------------------
enlarge Channel#2
CTRL | CTRL | 2
Revert to Tile View
CTRL | CTRL | 1-16
CTRL | CTRL | n
2
3
Mouse
Click the side-mouse button to toggle
between System / User modes.
In System mode: Click "Tile" on the
operation-taskbar.
n/a
Use steps described in previous actions
n/a
4
Touch Screen
In Scale view, User mode: Tap 4 times on the
enlarged window.
In Scale view, System mode: Tap 4 times
on the enlarged window to switch to User
mode, then tap 4 times (again).
n/a
Use steps described in previous actions
n/a
25
Advertisement
