Advertisement
SEC TIONS
Table of Contents
oPeRaTIon
#
Action / Mode
Enable Cursor Navigation VDT
6
Note: allow 10 seconds delay after
enabling for the 1st time .
7
Disable Cursor Navigation VDT
Change Active Source
Note: sources can also be switched
8
by using the combiner's front panel
push buttons .
9
Enlarge a source to full screen
Go back to last layout before
10
enlarging to full screen
Presentation mode ON; Enlarge each
channel to full screen when changing
11
active source using
5.6
CTRL | CTRL | Channel# (1-16)
12
Presentation mode OFF
5.6
5.6
This action is explained in detail using a step by step description ahead.
HSL Secure KVM Combiner Quick Setup Guide
1
Keyboard
Mouse
CTRL | CTRL | F11 | c
CTRL | CTRL | F11 | b
In System mode:
Click the channel window.
or Click the channel number on the operation-
CTRL | CTRL | Channel#
taskbar.
(1-16)
or Scroll the mouse wheel.
In User mode (with VDT ON):
Move mouse cursor across display boarders.
In System mode, Tile view: Double click any tile.
CTRL | CTRL | f
In System mode, Scale view: Double click on the
enlarged window.
1. Click the side-mouse button to toggle to
System mode.
CTRL | CTRL | z
2. Click Scale / Tile / Custom buttons on the
operation-taskbar.
CTRL | CTRL | p
CTRL | CTRL | n
2
3
n/a
n/a
n/a
n/a
4
Touch Screen
n/a
n/a
Touch the channel's screen area.
In User mode, Tile view: Tap 4 times on any tile.
In System mode, tile view: Tap 4 times on any
tile to switch to User mode, then tap 4 times
(again) on any tile.
Tap 4 times anywhere on the screen.
n/a
n/a
15
Advertisement
