Page 1
S E C U R E K V M S W I TC H E S | U S E R M A N U A L Models: SK21PH-4 / DK22PH-4 – Secure 2-Port DP/HDMI Video KVM Switch, PP 4.0 SK41PH/PHU-4 / DK42PH/PHU-4 – Secure 4-Port DP/HDMI Video KVM Switch, PP 4.0 DK42PHU-4T –...
Page 3
This manual refers to the following models: SK21PH-4 – Secure 2-Port 4K DP/HDMI Video Single Display KVM Switch, PP 4.0 DK22PH-4 – Secure 2-Port 4K DP/HDMI Video Dual Display KVM Switch, PP 4.0 SK41PH-4 –...
Page 4
SECTIONS Table of Contents InTRoDUCTIon KVM Specifications Part Number SK21PH-4 DK22PH-4 SK41PH/PHU-4 DK42PH/PHU-4 DK42PHU-4T SK81PH-4 DK82PH-4 No . of Sources Console Ports Displays 1 x DP/HDMI 2 x DP/HDMI 1 x DP/HDMI 2 x DP/HDMI 2 x DP/HDMI 1 x DP/HDMI...
SECTIONS Table of Contents InSTaLLaTIon Installing the KVM General • Mouse: Connect a USB mouse to the corresponding KVM console mouse port. • Verify that all peripherals and computers are turned off prior to • Audio peripherals: Connect headphones / speakers to the KVM connecting them to the product.
Page 6
SECTIONS Table of Contents InSTaLLaTIon Step 2 – Connect computers to the KVM Computer ports: • Computer keyboard & mouse connection: Connect each Single Display computer to the KVM keyboard & mouse computer port using a USB a to USB B cable. Connect the USB a end to the computer and the USB B end to KVM.
SECTIONS Table of Contents InSTaLLaTIon Step 3 – Power ON your system: Step 4 – Reset to Factory Defaults • Power ON the monitor: Make sure that the monitor is turned on Reset to factory defaults clears the device settings and restores the prior to powering on the KVM.
SECTIONS Table of Contents oPERaTIon Operating the KVM • once switching between channels, for example from channel #1 Front Panel Push-Buttons to channel #3, the USB device which is connected to the fUSB port • following power up, the default channel is #1. is automatically switched accordingly.
Page 9
• VDT is disabled by default. Resetting the product to factory defaults, disables VDT. • Multi-monitor computers require driver installation, currently available only for Windows (https://highseclabs.com/downloads/km-multi- display-drivers/). Switching from channel 1 to channel 2 will be done by moving the mouse right...
SECTIONS Table of Contents oPERaTIon Interchangeable KVM-to-KM Functionality • In KVM mode (default) one display, keyboard, mouse, USB and audio peripheral set is shared between all computers. Display Computers Audio • In KM mode each computer is connected to a separate display while keyboard and mouse are shared.
Page 11
SECTIONS Table of Contents oPERaTIon Switch between computers in KM mode: To change from KM to KVM mode: • Press the front panel buttons to manually switch control from one • Connect a Display to the KVM Console Port. computer to another. •...
SECTIONS Table of Contents oPERaTIon Keyboard shortcut options Action Description Keyboard (absolute) - L CTRL | L CTRL | F11 | c Toggle between mouse modes (Relative) - L CTRL | L CTRL | F11 | b System Reset to factory defaults L CTRL | L CTRL | F11 | r Enter Terminal-Mode L CTRL | R CTRL | t...