Utility Menu
Chapter 6
Use the
branch to view the unit's software revision, to reinitialize the unit, to set system
U
TILITY
parameters, and to restore factory default settings (see Figure 6-1).
SOFTWARE REV
Displays the current software revision level. This information is required when requesting assistance from
ADTRAN Customer Service or when updates are needed.
REINIT UNIT
Reinitializes the unit. Do not use this submenu to restore the factory default settings for all parameters;
instead, use the factory restore submenu (number 6).
ADDRESS
Displays and changes the unit address setting. To view the address navigate to this menu. To change the
address, highlight
A
DDRESS
After changing a digit, press
is blinking on that digit. Unit identification numbers must be between 0002 and 9999. See Figure 6-2 on
page 48.
61203060L1-1A
1) SOFTWARE REV
2) REINIT UNIT
UTIL
3) ADDRESS
4) SET PASSCODE
5) KEYPAD
6) FACT RESTORE
Figure 6-1. Utility Menu Tree
and press
. Then use the
E
NTER
to move to the next digit. To skip a digit, press
E
NTER
© 2003 ADTRAN, Inc.
and
arrow keys to change the digits.
U
D
P
OWN
while the cursor
E
NTER
47