Dmx Addressing - ProLights DIAMOND19CC User Manual

14

3.12 DMX ADDRESSING

For operation via light control unit with DMX512 protocol, is sufficient connect the controller to DIA-
MOND19CC. To able to operate the DIAMOND19CC with a light controller, adjust the DMX start address
for the first a DMX channel. If e. g. address 33 on the controller is provided for controlling the function of
the first DMX channel, adjust the start address 33 on the DIAMOND19CC. The other functions of the light
effect panel are then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of Start address
DMX channels (example)
14 33
15 33
16 33
26 33
DMX Address: 33
DMX512 Controller
DIAMOND19CC
DMX Address Next possible start
occupied address for unit No. 1
33-46
33-47
33-48
33-58
DMX Address: 48
Next possible start
address for unit No. 2
47
48
49
59
DMX Address: 63
Fig.5 - Esempio di configurazione a 15 canali DMX
Next possible start
address for unit No. 3
61
63
65
85
DMX Address: 78
75
78
81
111
. . . . . . . . . . . .