Connecting The Eraser To A Computer - StarTech.com 8STSDOCK1EU3P2 User Manual

Connecting the Eraser to a Computer

Connect a USB 3.0 cable between your computer and the
1.
USB 3.0 port on the back of the eraser.
Use the Power button on the back of the eraser to turn it on.
2.
To select an erase mode, use the Menu navigation buttons
3.
on the front of the eraser to move up and down in the Erase
mode menu.
Select the Link to PC option and press the OK button.
4.
When Are you sure? appears on the LCD display, press the
5.
OK button.
Press the ESC button. When Are you sure? appears on the
6.
LCD display, press the OK button to disconnect the eraser
from your computer.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
15