Erasing A Drive Using Custom Settings - StarTech.com 8STSDOCK1EU3P2 User Manual

mode menu.
Press the OK button.
5.
Warning! After you press the OK button, don't remove the
drive from the eraser until it has finished erasing. Removing
the drive before the erase is complete may result in damage
to the drive.
When the drive is erased, the LCD display indicates that the
6.
process is complete. If a serial printer is connected to the
eraser, a receipt prints out.
To remove the drive, press the Eject button.
7.

Erasing a Drive Using Custom Settings

Before you erase a drive, make sure that you back up any
important data on the drive that you want to erase.
Plug one end of the universal power adapter into the power
1.
jack on the back of the eraser and the other end into a power
source.
Use the Power button on the back of the eraser to turn it on.
2.
Place the drive that you want to erase in the drive bay. Make
3.
sure to push down on the drive to make sure that it's secure
in the eraser.
Use the Menu navigation buttons on the front of the eraser
4.
to move up and down in the Erase mode menu.
Select Custom Erase and press the OK button.
5.
Select Run <x> Pass and press the OK button.
6.
When the drive is erased, the LCD display indicates that the
7.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
9