Table of Contents
Advertisement
9. FUNCTION SETTING LIST
No.
Item
1
Soft start
The number of stitches to be sewn at a low speed when the soft-
function
start function is used at the start of sewing.
0 : Soft-start function is not operative
5
Flicker
Flicker reducing function (If the hand lamp flickers.)
reducing
0 : Flicker reducing function is not operative
function
1 : Less effective ıî 8 : Highly effective
7
Unit of bobbin
Unit of bobbin thread counting down
thread
0 : Count/10 stitches
counting
1 : Count/15 stitches
down
2 : Count/20 stitches
8
Number of
Sewing speed of reverse feed stitching
*
rotation of
reverse feed
stitching
10
Setting of
Position of needle bar is specified when the sewing machine stops.
needle bar stop
0 : Predetermined lowest position
position when
1 : Predetermined highest position
the sewing
machine stops.
11
Click sound of panel switch is specified.
Click sound
of panel
0 : Without click
switch
1 : With click
12
Optional
Switching of functions of optional switch
switch
0 : No function
function
1 : Needle up/down compensating stitching
selection
2 : No function
3 : No function
4 : Thread trimming function
5 : Presser foot lifting function
6 : One stitch compensating stitching
7 : No function
8 : Pedal neutral presser lifting function selection
Do not set to 2, 3 and 7. If these numbers are set, trouble or
accident will be caused.
Function of prohibiting start of the sewing machine by bobbin
13
Function of
prohibiting
thread counter (After thread trimming)
start of the
0 : When counting is out (-1 or less), function of prohibiting
sewing
machine by
1 : When counting is out (-1 or less), function of prohibiting
bobbin thread
counter
2 : Function of "1" + counter (-1 or less) stop (temporary stop)
18
Effective in combination with machine head with bird's nest
Bird's nest
prevention function
prevention
0 : Without bird's nest prevention function
function
1 : With bird's nest prevention function
2 : With bird's nest prevention function and thread release function
Needle
Effective in combination with machine head with bird's nest
19
thread
prevention function
release at
0 : Without needle thread release function
sewing start
1 : With needle thread release function
function
Function of
Function of lifting presser foot when the pedal is in neutral position.
21
neutral
0 : Function of neutral automatic presser lifting is not operative.
presser lifting
1 : Selection of function of neutral presser lifting.
22
Function of
Function of needle up/down compensating switch on the
changeover of
operation panel can be changed.
compensating
0 : Needle up/down compensation
switch on the
1 : One stitch compensation
operation panel
function
23
Presser lifting function selection
Presser lifting
function
0 : Ineffective
selection
1 : Effective
24
Function of fine
Number of rotation can be compensated.
*
adjustment of
Be sure to normally use this function with "0".
number of
rotation
28
Number of
Effective in combination with machine head with bird's nest
stitches of bird's
prevention function
nest needle
Number of stitches from start of sewing to release of needle thread
thread release
can be set.
* Do not change the set values with asterisk (*) as they are functions for maintenance. If the standard set value set at the time of
delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
Description
start of the sewing is not operative.
start of the sewing machine is operative.
Setting
level
1
2
1
1
2
2
2
2
2
2
2
2
2
2
1
111
−
−
Panel display
Setting range
Standard set value
0 to 9
N-SOFT
3
0 to 8
T-ACC
0
0/1/2
RATIO
0
150 to 3000
S-BT
1350
1/0
NPS
0
1/0
SOUND
1
0 to 8
SW2
0
0/1/2
ASCNT
0
0/1/2
BNC
0
1/0
THOLD
0
1/0
N-NPL
0
1/0
F-CMSP
0
1/0
F-AFL
0
±15%
F-FAS
0
0 to 30
F-UTHR
1
Ref.
Page
115
115
115
115
115
115
116
Advertisement
Table of Contents
