Position Of The Thread Tension; Position Of The Pre-Tension - JUKI IP-100A Engineer's Manual

(15) Position of the thread tension

(16) Position of the pre-tension

Setscrew nut 1
Fig. 1 Longitudinal position
Standard Adjustment
Striking face on the
machine arm
Thread tension controller
Standard Adjustment
Almost in parallel to
the machine arm
Thread tension controller
28
−
* Felt of the thread tension
controller is a consumable part.
Replace it when it is consumed.
Part No. of felt : 22528509
Fig. 2 Orientation
−
1
Thread should enter the
rotary disk straight.