Table of Contents
Advertisement
Item
No.
Compensation
Compensation of starting the solenoid for reverse feed stitching
51
*
of solenoid-on
when reverse feed stitching at the start of sewing is performed.
timing of
reverse feed
stitching at the
start of sewing
52
Compensation
Compensation of releasing the solenoid for reverse feed stitching
*
of solenoid-off
when reverse feed stitching at the start of sewing is performed.
timing of
reverse feed
stitching at the
start of sewing
53
Compensation
Compensation of releasing the solenoid for reverse feed stitching
*
of solenoid-off
when reverse feed stitching at the end of sewing is performed.
timing of
reverse feed
stitching at the
end of sewing
55
Foot lift after
Function of lifting presser foot at the time of (after) thread
thread
trimming
trimming
0 : Not provided with the function of lifting presser foot after
1 : Provided with the function of lifting presser foot
56
Reverse
Function of reverse revolution to lift the needle at the time of
revolution to lift
(after) thread trimming
the needle
0 : Not provided with the function of reverse revolution to lift
after thread
trimming
1 : Provided with the function of reverse revolution to lift the
58
Function of
Function of holding predetermined upper/lower position of the
holding
needle bar
predetermined
0 : Not provided with the function of holding predetermined
upper/lower
position of the
1 : Provided with the function of holding predetermined upper/
needle bar
59
Function of
This function can specify the sewing speed of reverse feed
Auto/Manual
stitching at the start of sewing.
change-over of
0 : The speed will depend on the manual operation by pedal,
reverse feed
stitching at the
1 : The speed will depend on the specified reverse feed
start of sewing
60
Function of
Function at the time of completion of reverse feed stitching at the
stop
start of sewing
immediately
0 : Not provided with the function of temporary stop of the
after reverse
feed stitching
at the start of
1 : Provided with the function of temporary stop of the sewing
sewing
Change-over
Initial speed when starting EBT
64
*
speed of
condensation
stitch or EBT
(end back tack)
Function of
70
Presser foot is slowly lowered.
soft-down of
0 : Presser foot is rapidly lowered.
presser foot
1 : Presser foot is slowly lowered.
Function of
71
Speed limitation is performed at the time of re-acceleration on the
limitation of re-
way of reducing speed of the sewing machine.
acceleration
It is effective when operating inching sewing.
from reduction
of speed
Function of
72
Speed limitation is performed at the time of start-up of the sewing
limitation of
machine (excluding the start of sewing).
acceleration at the
It is effective when operating inching sewing.
start of rotation
Retry function
This function is used when needle cannot pierce materials .
73
0 : Normal
1 : Retry function is provided.
Function to
76
Starting curve of the sewing machine is selected.
select the start-
0 : Normal curve
up speed of the
1 : More sharp curve
sewing machine
* Do not change the set values with asterisk (*) as they are functions for maintenance. If the standard set value set at the time of
delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
Description
thread trimming
automatically after thread trimming
the needle after thread trimming
needle after thread trimming
upper/lower position of the needle bar
lower position of the needle bar
etc.
stitching speed (No. 8).
sewing machine at the time of completion of reverse feed
stitching at the start of sewing
machine at the time of completion of reverse feed stitching
at the start of sewing.
Setting
level
1
1
1
2
2
2
2
2
2
2
2
1
1
2
113
−
−
Panel display
Setting range
Standard set value
-36 to 36
T-SON
0
-36 to 36
T-SOFF
0
-36 to 36
T-EOFF
0
1/0
FLAT
1
1/0
RATRM
0
1/0
HPOS
0
1/0
SBTO
1
1/0
SBTQ
0
0 to 250
S-WAIT
170
0/1
F-SDFL
0
0 to 5
F-ACRA
0
0 to 5
F-ACR
1
1/0
F-RET
1
1/0
F-SCS
0
Ref.
Page
117
117
117
118
118
118
118
118
119
119
119
119
119
Advertisement
Table of Contents
