Table of Contents
Advertisement
No.
Item
Function of
Pedal curve is selected. (Improving pedal inching operation)
87
pedal curve
selection
Return of
Return of feed function
89
needle thread
0 : Without function
feed
1 : With function
*
Function of
Function of compensating stitching when turning handwheel by
91
prohibiting
hand at the time of completion of constant-dimension stitching
compensation
0 : Function of compensating stitching is effective.
operation after
1 : Function of compensating stitching is prohibited.
turning
handwheel by
hand
Function of
Function to reduce speed at the time of reverse feed stitching at
92
reducing
the start of sewing.
speed of
0 : Speed is not reduced.
reverse feed
1 : Speed is reduced.
stitching at the
start of sewing
Function
Operation of needle up/down compensating switch is changed
93
added to
after turning ON the power or thread trimming.
needle up/
0 : Normal (needle up/down compensating stitching only)
down
1 : One stitch compensating stitching is performed only when
compensating
switch
Max. number
96
Max. number of rotation of the sewing machine head can be set.
of rotation
* Setting varies in accordance with resistance pack to be connected.
setting
100
Thread
Thread release at sewing start function
release at
Setting of number of stitches to actuate thread release function at
sewing start
the start of sewing
function
Counter
Counter function selection
101
function
Whether counter operates every thread trimming or manually is
selection
selected.
0 : Every thread trimming
1: By manual SW
103
Pedal sensor
Pedal sensor neutral compensation function
neutral
0 : Pedal sensor neutral compensation function is ineffective
compensation
1 : Pedal sensor neutral compensation function is effective.
function
* Do not change the set values with asterisk (*) as they are functions for maintenance. If the standard set value set at the time of
delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
Description
2
Number of rotations
0
aforementioned changeover is made. (Upper stop ıî upper
stop)
Setting
level
2
1
Pedal stroke
2
2
2
2
2
2
2
2
114
−
−
Panel display
Setting range
Standard set value
0/1/2
F-PCS
0
1/0
TRS
1
1/0
F-PMAT
1
1/0
F-DSBT
0
1/0
F-MADF
0
50 to MAX
S-MAX
4000
0 to 9
F-THLS
0
1/0
F-MAC
0
1/0
F-ANP
0
Ref.
Page
120
119
120
120
Advertisement
Table of Contents
